# This configuration file is for reference only. Please do not use this configuration directly to run the program as it may have various issues. # A literal address or host name for IPv6 must be enclosed # in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80" # For single "bindAddr" field, no need square brackets, like `bindAddr = "::"`. bindAddr = "0.0.0.0" bindPort = 7000 # udp port used for kcp protocol, it can be same with 'bindPort'. # if not set, kcp is disabled in frps. kcpBindPort = 7000 # udp port used for quic protocol. # if not set, quic is disabled in frps. # quicBindPort = 7002 # Specify which address proxy will listen for, default value is same with bindAddr # proxyBindAddr = "127.0.0.1" # quic protocol options # transport.quic.keepalivePeriod = 10 # transport.quic.maxIdleTimeout = 30 # transport.quic.maxIncomingStreams = 100000 # Heartbeat configure, it's not recommended to modify the default value # The default value of heartbeatTimeout is 90. Set negative value to disable it. # transport.heartbeatTimeout = 90 # Pool count in each proxy will keep no more than maxPoolCount. transport.maxPoolCount = 5 # If tcp stream multiplexing is used, default is true # transport.tcpMux = true # Specify keep alive interval for tcp mux. # only valid if tcpMux is true. # transport.tcpMuxKeepaliveInterval = 60 # tcpKeepalive specifies the interval between keep-alive probes for an active network connection between frpc and frps. # If negative, keep-alive probes are disabled. # transport.tcpKeepalive = 7200 # transport.tls.force specifies whether to only accept TLS-encrypted connections. By default, the value is false. transport.tls.force = false # transport.tls.certFile = "server.crt" # transport.tls.keyFile = "server.key" # transport.tls.trustedCaFile = "ca.crt" # If you want to support virtual host, you must set the http port for listening (optional) # Note: http port and https port can be same with bindPort vhostHTTPPort = 80 vhostHTTPSPort = 443 # Response header timeout(seconds) for vhost http server, default is 60s # vhostHTTPTimeout = 60 # tcpmuxHTTPConnectPort specifies the port that the server listens for TCP # HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP # requests on one single port. If it's not - it will listen on this value for # HTTP CONNECT requests. By default, this value is 0. # tcpmuxHTTPConnectPort = 1337 # If tcpmuxPassthrough is true, frps won't do any update on traffic. # tcpmuxPassthrough = false # Configure the web server to enable the dashboard for frps. # dashboard is available only if webServer.port is set. webServer.addr = "127.0.0.1" webServer.port = 7500 webServer.user = "admin" webServer.password = "admin" # webServer.tls.certFile = "server.crt" # webServer.tls.keyFile = "server.key" # dashboard assets directory(only for debug mode) # webServer.assetsDir = "./static" # Enable golang pprof handlers in dashboard listener. # Dashboard port must be set first webServer.pprofEnable = false # enablePrometheus will export prometheus metrics on webServer in /metrics api. enablePrometheus = true # console or real logFile path like ./frps.log log.to = "./frps.log" # trace, debug, info, warn, error log.level = "info" log.maxDays = 3 # disable log colors when log.to is console, default is false log.disablePrintColor = false # DetailedErrorsToClient defines whether to send the specific error (with debug info) to frpc. By default, this value is true. detailedErrorsToClient = true # auth.method specifies what authentication method to use authenticate frpc with frps. # If "token" is specified - token will be read into login message. # If "oidc" is specified - OIDC (Open ID Connect) token will be issued using OIDC settings. By default, this value is "token". auth.method = "token" # auth.additionalScopes specifies additional scopes to include authentication information. # Optional values are HeartBeats, NewWorkConns. # auth.additionalScopes = ["HeartBeats", "NewWorkConns"] # auth token auth.token = "12345678" # oidc issuer specifies the issuer to verify OIDC tokens with. auth.oidc.issuer = "" # oidc audience specifies the audience OIDC tokens should contain when validated. auth.oidc.audience = "" # oidc skipExpiryCheck specifies whether to skip checking if the OIDC token is expired. auth.oidc.skipExpiryCheck = false # oidc skipIssuerCheck specifies whether to skip checking if the OIDC token's issuer claim matches the issuer specified in OidcIssuer. auth.oidc.skipIssuerCheck = false # userConnTimeout specifies the maximum time to wait for a work connection. # userConnTimeout = 10 # Only allow frpc to bind ports you list. By default, there won't be any limit. allowPorts = [ { start = 2000, end = 3000 }, { single = 3001 }, { single = 3003 }, { start = 4000, end = 50000 } ] # Max ports can be used for each client, default value is 0 means no limit maxPortsPerClient = 0 # If subDomainHost is not empty, you can set subdomain when type is http or https in frpc's configure file # When subdomain is test, the host used by routing is test.frps.com subDomainHost = "frps.com" # custom 404 page for HTTP requests # custom404Page = "/path/to/404.html" # specify udp packet size, unit is byte. If not set, the default value is 1500. # This parameter should be same between client and server. # It affects the udp and sudp proxy. udpPacketSize = 1500 # Retention time for NAT hole punching strategy data. natholeAnalysisDataReserveHours = 168 # ssh tunnel gateway # If you want to enable this feature, the bindPort parameter is required, while others are optional. # By default, this feature is disabled. It will be enabled if bindPort is greater than 0. # sshTunnelGateway.bindPort = 2200 # sshTunnelGateway.privateKeyFile = "/home/frp-user/.ssh/id_rsa" # sshTunnelGateway.autoGenPrivateKeyPath = "" # sshTunnelGateway.authorizedKeysFile = "/home/frp-user/.ssh/authorized_keys" [[httpPlugins]] name = "user-manager" addr = "127.0.0.1:9000" path = "/handler" ops = ["Login"] [[httpPlugins]] name = "port-manager" addr = "127.0.0.1:9001" path = "/handler" ops = ["NewProxy"]